Used Traynor YCV40 - Red

  • $539.99
    Unit price per 


This is a Used Red Traynor YCV40 in fair condition, with some slight signs of wear and tear. Some of the pots are a little scratchy, and the spring reverb doesn't seem to be functioning, however it still sounds great!

The first guitar amp that brought the Traynor name back into the world of modern tube amps was the YCV40, and it continues on today. Real tube overdrive is provided by three 12AX7WA dual triode preamp tubes while real tube power is provided by two 5881WXT beam power tubes. The internal gadgetry in this channel switching amp provides good flexibility, but makes it very easy to get a great tone. The combination of the tube power and the Celestion™ speaker is magical. The three basic tones (clean, crunch and overdrive) are easily defined. With great tone at low levels, and shine and punch at full tilt, the Custom Valve 40 has received rave reviews for over 10 years, including Guitar Player™ magazine’s Editor’s Pick Award in 2001.

Although signal-to-noise is not normally a specification that is discussed where guitar amplifiers are concerned, the ultra-quiet Custom Valve 40 makes it an issue. Experienced professional users will appreciate the auto-matching tube circuit that maintains bias balance as tubes age ensuring hum free performance. Listen carefully. Although the YCV40 has a tremendous amount of gain it remains virtually hum free.

Cabinet Impedance (Ohms) 8
Power @ min.  impedance (Watts) 40
Minimum Impedance (Ohms) 4
Speaker Configuration – LF (Size / Power) 12 inch / 40 Watts
Inputs 2
Channel 1 – Inputs 1/4 inch phone
Channel 1 – Controls Gain, Volume, Treble, Bass, Middle
Channel 1 – Switches Boost
Channel 2 – Inputs Shares ch 1 input
Channel 2 – Controls Volume, Treble, Bass, Middle
Channel 2 – Switches Channel Select, Brightness
Channel Switching Yes
Main Tone Controls Presence
Line Out (type / configuration) 1/4 inch TRS / Rear (Effects Send)
Effects Volume Yes
Effects Loop / Location Yes / Rear
Effects Footswitch / Function Yes / Channel Select, Boost
Internal Reverb / Effects Spring Reverb
LED Indicators Channel Select, Boost, Power, Standby
External speaker output / location 1/4 inch / Rear
Other Features Standby Switch – Activates standby mode to keep the tubes warm while the amp is not in use.
Auto Tube-matching Circuit
Preamp Tube – 3x 12AX7WA Dual Triodes (Russia)
Power Amp Tube – 2x 6L6GB Beam Power Tubes (Russia)
DC filaments on preamp tubes eliminate hum
Fully regulated power supply with tube rectifier emulation
Perforated Steel Grille
Dimensions (DWH, inches) 9.5 x 23 x 18
Dimensions (DWH, cm) 24 x 58 x 46
Weight (lbs / kg) 45 / 20.4

We Also Recommend